Reasons Your Water Heater Isn't Functioning

Reasons Your Water Heater Isn't Functioning

Blog Article

Schedule Now!

Everyone is bound to have his or her own idea about How to Troubleshoot and Repair an Electric Water Heater.

Many modern-day homes take advantage of an electric hot water heater for their heating unit, as a result of its benefit and also simplicity of use. Nonetheless, much like any other electrical home appliances, problems might arise with its use, unexpectedly. It can be really irritating to wake up to a cool shower instead of a warm one or having your bath with water that isn't warm enough and even also hot. Whatever the situation might be, water heater troubles can be quite stressful. Fortunately, we've made a checklist of possible options to your water heater problems. There are a variety of factors that might create a number of these troubles, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you turn off the primary power supply for safety and security. Whatever the problem is, getting it taken care of need to not pose excessive of a concern if you follow these steps:

Inspect Your Power Supply:

As standard as this may seem, it is really essential. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, simply turn it off and on once more. Change any broken or worn-out fuse. Evaluate the home appliance with power after these adjustments to see if it's currently working.

Inspect the Heating Element in the Hot Water Heater:

If it's not a power trouble, after that attempt checking out your heating element if it is still working. Check each of your burner to ensure the trouble isn't with any one of them. If any one of them is faulty, change that component and then examine whether the warm water is back on.

Check Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature reset above the thermostat. This should help heat the water. Turn the circuit breaker back on and check if the trouble has actually been settled.

Call A Specialist:

If after changing all malfunctioning components as well as resetting your temperature, the water heater still isn't working, you may require to speak to a specialist plumber for a specialist viewpoint. The issue with your heating system could be that the cold and hot faucets have actually been changed or it may be undersized for the amount of warm water required in your house. Whatever the situation may be, a professional plumber would certainly aid fix the issue.

Conclusion

Water heater troubles are not constantly major. A lot of them are due to small concerns like a blown fuse or worn-out heating element. Changing the malfunctioning parts should suffice. Nevertheless, if you are still not able to solve the trouble, give a call to your nearby plumber to find to get it fixed.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

I recently found that page on How to Troubleshoot and Repair an Electric Water Heater when doing a lookup on the web. You should take the time to distribute this blog posting if you appreciated it. I praise you for your time. Don't hesitate to check our blog back soon.

Check It Out

Report this page